Get started with Q‑Rejuvalight Pro
IMPORTANT NOTICE:
Please read the complete instruction manual carefully before using the device.
The Qure Q-Rejuvalight Pro LED Mask is an at-home LED light therapy device designed to target fine lines, breakouts, and dullness in just one 3-minute treatment.
This guide will show you exactly how to use it, care for it, and get the best results from your treatments.
Schedule & Set Reminders
The Qure app is designed to make your Q-Rejuvalight Pro routine feel effortless.
It guides each session, keeps track of your treatments, and helps consistency build naturally over time, without needing to think about timing or progress.
Quick Start Guide
Box out, mask on! To get started with your first treatment, you'll need the following:
- Q-Rejuvalight Pro LED Mask
- Adjustable head strap (provided)
- Eye protection goggles (provided)
Step-By-Step Guide
Step 1
Set up your mask by attaching the adjustable strap.
With the logos facing down, slide the strap into the first clip. Loop the strap through the adjustor and second clip.
Step 2
Secure the strap with the provided pin on the inner side of the mask.
Step 3
Insert goggles from the inside of the mask.
Ensure that the smaller side of the goggles go in first.
Step 4
Prepare your skin for your treatment by cleansing and dry thoroughly.
Tip:Use our Dermal Mist to further cleanse and prepare your skin.
Step 5
Press and hold the power button ON for 2-3 seconds until the indicator light turns on.
Position the mask on your face. Adjust the straps to fit your face comfortably.
Step 6
Choose your treatment either in the Qure app or directly on the mask.
Press the power button once for Skin Rejuvenation mode, or press it twice for Skin Clearing mode.
Light sensitivity test:We recommend performing a light sensitivity test 24 hours before using this device for your first treatment. To perform this, apply the product to your inner forearm, ensuring the light shines directly onto the skin. Use it for a full 3-minute treatment. Wait for 24 hours. If you experience pain, discomfort, or redness lasting more than 2 hours, you might be light-sensitive. Please consult a doctor for advice before continuing use.
Charging Your Device
To charge your device, connect the supplied USB-C cord to your Q-Rejuvalight Pro and plug into a USB power adapter.
While charging, the indicator will flash white.
When the battery is fully charged, the indicator will be solid white.
No light when plugged in means the device is fully charged already.
Tips to maximize battery life:
- Avoid leaving your device charging for long periods of time.
- Avoid letting the battery completely run out.
- Do not use your device while it's connected to the charger.
Treatment Modes
The Q-Rejuvalight Pro Mask has two complete treatment settings: Skin Rejuvenating or Skin Clearing.
Press the power button once for Skin Rejuvenating mode, or press it twice for Skin Clearing mode.
-
Skin Rejuvenating Mode
On Skin Rejuvenating Mode, red and infrared wavelengths work together to help improve the appearance of skin texture and firmness.
-
Skin Clearing Mode
Our Skin Clearing Mode combines blue and red light wavelengths. Blue targets the bacteria associated with mild-to-moderate acne, while red helps calm and soothe the appearance of irritated skin.
Care & Maintenance
Wipe the mask down after each treatment.
Spray with our Dermal Mist to sanitize and keep the mask clean for your next use.
When not in use, place your mask in the luxury storage bag provided with your set. Store it in a cool, moisture-free environment.
Troubleshooting & Adjustments
Having trouble? Don't worry, most issues are quick to solve.
Mask not turning on
- Make sure the device is fully charged (you'll see a blinking light when charging).
- Remove the mask from the charging cable, as the mask cannot be used while plugged in.
- Check that the USB-C charging cable is fully inserted when charging.
- Still nothing? Try a different outlet or charging cable to rule out charging issues.
Mask turning off too early
The treatment auto-stops after 3 minutes per treatment. If it's stopping earlier, your mask may need a full recharge.
Mask not connecting to the app
Ensure your phone/tablet's Location Sharing is on. If connectivity issues persist, try closing the app and reopening to reload it.
Frequently Asked Questions
Some people notice a glow after just one use, but visible improvements usually happen after a few weeks of consistent use.
We recommend using it at least 3–5 times per week for best results. Each session only takes 3 minutes.
Yes, it's safe for daily use. Just stick to one treatment per day.
Yes, but use the mask first on clean, dry skin. You can apply your serums and moisturizers afterward.
It’s best to wait at least a week post-treatment. When in doubt, check with your practitioner.
Use a soft, damp cloth to wipe the surface. Don’t use harsh cleaners or submerge it in water.
The Q-Rejuvalight Pro LED Mask fully charges in 2.5 hours. A full battery will then delivery 10 complete treatments.
The light indicator will blink white to signal low battery.
Don't see your question?Ask us
